STM32F103C8T6 ARM STM32 Minimum System Development Board Module, Module STM32F103C8T6 Core Learning Board For Arduino
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Free Delivery
    From Ksh 10,000+
  • 99% Customers
    Feedbacks
  • 365 Days
    For Free Return
  • Payment
    Secure System
  • Only Best
    Brands

STM32F103C8T6 ARM STM32 Minimum System Development Board Module, Module STM32F103C8T6 Core Learning Board For Arduino

Available: In Stock
KSh500.00
Image
  • Order within
  1. Product Introduction

    This is a core chip based on for CS32F103C8T6 ARM core board, features are as follows:
    1, the board based on the most basic MCU circuit, 8M and 32768 crystal circuit, USB power supply circuit.
    2, the core board is divided into two rows leads to all the I / O port.
    3, with SWD simulation debug download interface, simple and convenient, debugging speed.
    4, the use of the Mirco USB interface, you can do USB communication and power supply, USB interface, compatible with the ordinary Andrews mobile phone charger interface.
    6, RTC crystal Epson brand, easy to start, more stable.
    7, with double pin, but the pin does not default welding, the user according to their own application scenarios to choose their own welding direction. If welding is required, please tell the owner.
    Keil can be used to compile, IAR compiler, can be downloaded through the J-Link or USART1 procedures, the procedures are the owner and debugging procedures, there are problems can consult the owner.

     

  2.  Chip Description:

    1, 32F103C8T6
    Package Type: LQFP;
    Number of pins: 48;
    Kernel: Cortex-M3;
    Operating frequency: 72MHz;
    Storage resources: 64K Byte Flash, 20KByte SRAM;
    Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports,
    Analog-to-digital conversion: 2x ADC (12-bit / 16-channel)
    Timers: 3 general timers and 1 advanced timer
    Debug Download: Support JTAG / SWD debug interface to download, support for IAP.
    2, RT9193: 3.3V regulator chip, the maximum output of 300mA.

     

  3.  Interface description:

    1, SWD interface: support for simulation, download and debug.
    2, Mirco USB interface: power supply and USB communication, does not support the download.
    3, USART1 interface: USART1 can be used to download the program, or use the USART1 for communication.
    4, MCU pin interface: leads all I / O port pins, easy to connect with peripherals.
    5, 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatment

     

  4.  Other Device Description:

    1, Power LED (PWR): Power indicator status, can determine whether the power supply is stable.
    2, the user LED (PC13): to facilitate the I / O output test or indicate the program running.
    3, start jumping choose programming mode: (1, the user flash memory 2, SRAM 3, system memory).
    4, reset button: reset chip for the user program.
    5, 8M Crystal: The frequency can be set to make the system clocked at 72MHz.
    6,32.768KHz Crystal: Available for built-in RTC, or for calibration.
 
  1. Product Introduction

    This is a core chip based on for CS32F103C8T6 ARM core board, features are as follows: 1, the board based on the most basic MCU circuit, 8M and 32768 crystal circuit, USB power supply circuit. 2, the core board is divided into two rows leads to all the I / O port. 3, with SWD simulation debug download interface, simple and convenient, debugging speed. 4, the use of the Mirco USB interface, you can do USB communication and power supply, USB interface, compatible with the ordinary Andrews mobile phone charger interface. 6, RTC crystal Epson brand, easy to start, more stable. 7, with double pin, but the pin does not default welding, the user according to their own application scenarios to choose their own welding direction. If welding is required, please tell the owner. Keil can be used to compile, IAR compiler, can be downloaded through the J-Link or USART1 procedures, the procedures are the owner and debugging procedures, there are problems can consult the owner.

     

  2.  Chip Description:

    1, 32F103C8T6 Package Type: LQFP; Number of pins: 48; Kernel: Cortex-M3; Operating frequency: 72MHz; Storage resources: 64K Byte Flash, 20KByte SRAM; Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports, Analog-to-digital conversion: 2x ADC (12-bit / 16-channel) Timers: 3 general timers and 1 advanced timer Debug Download: Support JTAG / SWD debug interface to download, support for IAP. 2, RT9193: 3.3V regulator chip, the maximum output of 300mA.

     

  3.  Interface description:

    1, SWD interface: support for simulation, download and debug. 2, Mirco USB interface: power supply and USB communication, does not support the download. 3, USART1 interface: USART1 can be used to download the program, or use the USART1 for communication. 4, MCU pin interface: leads all I / O port pins, easy to connect with peripherals. 5, 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatment

     

  4.  Other Device Description:

    1, Power LED (PWR): Power indicator status, can determine whether the power supply is stable. 2, the user LED (PC13): to facilitate the I / O output test or indicate the program running. 3, start jumping choose programming mode: (1, the user flash memory 2, SRAM 3, system memory). 4, reset button: reset chip for the user program. 5, 8M Crystal: The frequency can be set to make the system clocked at 72MHz. 6,32.768KHz Crystal: Available for built-in RTC, or for calibration.
 

RETURNS POLICY

Mhenga.com returns submitted in-store or by mail are refunded to your original method of payment. Outbound shipping charges are not always refunded upon return, this can include regular and freight shipping, and any shipping surcharges.

  • Debit and credit card refunds may take up to 10 business days depending on your financial institution
  • Pay with Cash orders are refunded in-store only; if your Pay with Cash order is canceled, you will receive an email once your refund is ready; please bring this email with you to collect your refund

Store Returns with a Receipt

Credit Card

  • If your purchase was made using a credit card, any refund is required to be issued to that same credit card. If the original credit card is not present and is not available by scanning the receipt, the refund will be processed onto a Walmart shopping card or gift card

Debit Card

  • If your purchase was a debit transaction, the refund is placed back on the debit card, if available, or cash can be provided

Store Returns without a Receipt

If you do not have your receipt, we will accept your return or exchange if it falls into the following guidelines:

  • You are required to present a valid, government-issued, photo ID that has not been altered in any way. Information from your ID is stored in a secured database of returns activity that Walmart uses to authorize returns.
  • The refund verification process accepts the return. If an item is returned without a receipt and the refund verification process accepts it, the following options are available:
    • If available, you may send the merchandise to the manufacturer for repair
    • The merchandise may be exchanged for another item
    • The merchandise may be returned and a cash refund provided if the refund value of the returned item is less than Ksh 1,000
    • The merchandise will be returned and a Walmart shopping card or gift card is provided if the refund value of the returned merchandise is equal to or greater than Ksh 1,000

SHIPPING

 

Express Delivery Nairobi Area

We recognize the trust you place in us when we deliver to your doorstep, shipping dock or place of business. That’s why we want to keep you informed on the actions we are taking to keep you – and our team members – safe amidst the COVID-19 outbreak.

Other Deliveries

In Nairobi

You will receive your good the second day at a central location in your area at only Ksh 99. We use pickup mtaani for delivery.

Outside Nairobi

You will recieve your good the second day, we use different courier services, incase of an emergency or a different preferred method, call us and we shall organize for that.